Electro-Optical and Thermophysical Characterization of Poly (Tripropylene Glycol Di-Acrylate)/Liquid Crystal Composite Materials Prepared by Polymerization Induced Phase Separation

Abstract

This work examines the development and characterization of tripropylene glycol di-acrylate/liquid crystal E7 (TPGDA/LC E7) PDLCs composite materials (polymer-dispersed-liquid-crystals). These systems were produced by UV irradiation photopolymerization (PIPS) of a mixture of the monomer tripropylene glycol di-acrylate (TPGDA) and the liquid crystal E7 (LC E7, a mixture of three cyano-biphenyl and one cyano-terphenyl LCs), in the presence of 2?wt% (of the acrylate/E7 mixture) of a photoinitiator. Electro-optical, thermal and optical characterization was used to understand the effect of the LC concentration on the electro-optical and thermo-physical properties of these materials. Polarizing optical microscopy (POM) and differential scanning calorimetry (DSC) studies were performed to observe the system morphology and to determine the transition temperatures of these materials, both as a function of their composition. The findings showed a slight variation of the nematic-isotropic transition temperature, T_NI, of the LC E7 and of the glass transition temperature, T_g, of the TPGDA polymeric matrix as a function of the mass percentage of the LC E7. A very good electro-optical response for the composition 30/70?wt % TPGDA/LC E7 was obtained.     

A modified SPH method to model the coalescence of colliding non-Newtonian liquid droplets

This paper develops a modified smoothed particle hydrodynamics (SPH) method to model the coalescence of colliding non-Newtonian liquid droplets. In the present SPH, a van der Waals (vdW) equation of state is particularly used to represent the gas-to-liquid phase transition similar to that of a real fluid. To remove the unphysical behavior of the particle clustering, also known as tensile instability, an optimized particle shifting technique is implemented in the simulations. To validate the numerical method, the formation of a Newtonian vdW droplet is first tested, and it clearly demonstrates that the tensile instability can be effectively removed. The method is then extended to simulate the head-on binary collision of vdW liquid droplets. Both Newtonian and non-Newtonian fluid flows are considered. The effect of Reynolds number on the coalescence process of droplets is analyzed. It is observed that the time up to the completion of the first oscillation period does not always increase as the Reynolds number increases. Results for the off-center binary collision of non-Newtonian vdW liquid droplets are lastly presented. All the results enrich the simulations of the droplet dynamics and deepen understandings of flow physics. Also, the present SPH is able to model the coalescence of colliding non-Newtonian liquid droplets without tensile instability.     

Measurement of Residual Dipolar Couplings of Organic Molecules in Multiple Solvent Systems Using a Liquid-Crystalline-Based Medium

Residual dipolar coupling (RDC), a robust anisotropic NMR parameter for structural elucidation of organic molecules, is only accessible in an anisotropic environment. Herein, we introduce a novel alignment medium based on the molecular self-assembly of oligopeptide amphiphile (OPA). This medium is compatible with different intermediate and polar solvent systems, such as CD₃OD, [D₆]DMSO, and D₂O. The preparation of the OPA-based medium is simple and rapid, while only very weak background signals were observed from OPAs. Furthermore, we show that the purity of OPA has only a minor influence on the quality of the RDC data. These advantages allow RDC measurements of organic molecules with different polarities and solubilities with high efficiency and accuracy.     

Spontaneous translation of nanodroplet over a heterogeneous surface due to thermal cycles: role of solid–liquid interfacial fluctuations

ABSTRACT

We study the molecular-scale features of the solid surface that result in the spontaneous motion of a nanodroplet due to the periodic variation of temperature. We first employ a thermodynamic model to predict the variation of solid–fluid interfacial properties that can result in the above motion. The model identifies a composite (surface couple) made of two surfaces that are characterised by a large difference between the entropic parts of the solid–liquid interfacial free energies. In order to understand the molecular-scale features of the two surfaces that may form a surface couple, we performed grand canonical Monte Carlo simulations of Lennard Jones fluid and crystalline surfaces made of Lennard Jones-like atoms. We then used the cumulant expansions of the perturbation formulas to divide the interfacial entropy into two parts: The one that is directly affected by the solid–fluid attraction (direct part), and the other (indirect part) that is indirectly affected by the solid–fluid attraction via the alteration of interfacial fluctuations. Our results indicate that two surfaces form a surface couple if the differences between their chemical natures lead to large differences in the indirect part of the interfacial entropy, while the direct part remains relatively unaffected.     

Proton conductivity study on three CS/IL@fle-MOF membranes

The low-cost, high specific surface area and porosity, controlled pore size, and chemical properties of metal–organic framework (MOF) materials have attracted much attention in the exploration of proton conduction. The method of chemically modifying MOF structures or introducing conductive medium into the holes can effectively improve the proton conductivities of the materials. Here, the structural tunability of ionic liquid (IL) and flexible MOF (fle-MOF) materials are matched to give full play to the conductivity of IL, the framework support, and the microporous effect of MOFs, which achieves the synergistic effect of performance and expands the temperature range of proton transfer. Three kinds of CS/IL@fle-MOF membranes were prepared by combining three fle-MOFs with 1-carboxymethyl-3-methylimidazole (CMMIM) in different proportions to obtain 15 pieces of membranes. The comparative analyses show that CS/IL@fle-MOF membranes have excellent proton conduction performance at a wider temperature range (263–353 K) and lower relative humidity (75% RH). Among them, the proton conductivities of CS/CMMIM@MIL-88A-25% and CS/CMMIM@MIL-88B-125% are up to 1.33 and 1.42 S cm⁻¹ at 75% RH and 353 K, respectively; whereas those of CS/CMMIM@MIL-53(Fe)-75% and CS/CMMIM@MIL-88B-125% reach up to 2.1 × 10⁻³ and 1.28 × 10⁻³ S cm⁻¹ at 75% RH and 263 K, respectively. The E_a of CS/CMMIM@fle-MOFs is in the range of 0.1–0.5 eV, suggesting that the proton transport follows predominantly the typical Grotthuss transfer mechanism. The results of this study indicate that the CS/CMMIM@fle-MOF membranes combinations offer great potential for the design of composite porous proton-conducting materials.     

A novel LC–MS/MS method for the determination of ziritaxestat in rat plasma and its pharmacokinetic study

Ziritaxestat is a first-in-class autotoxin inhibitor. The purpose of this study was to develop a liquid chromatography/electrospray ionization tandem mass spectrometric (LC–MS/MS) method for the determination of ziritaxestat in rat plasma. The plasma sample was deproteinated using acetonitrile and then separated on an Acquity BEH C₁₈ column with water containing 0.1% formic acid and acetonitrile as mobile phase, which was delivered at 0.4 ml/min. Ziritaxestat and the internal standard (crizotinib) were quantitatively monitored with precursor-to-product transitions of m/z 589.3 > 262.2 and m/z 450.1 > 260.2, respectively. The total running time was 2.5 min. The method showed excellent linearity over the concentration range 0.5–2000 ng/ml, with correlation coefficient >0.9987. The extraction recovery was >82.09% and the matrix effect was not significant. Inter- and intra-day precisions (RSD) were <11.20% and accuracies were in the range of −8.50–7.45%. Ziritaxestat was demonstrated to be stable in rat plasma under the tested conditions. The validated LC–MS/MS method was successfully applied to study the pharmacokinetic profiles of ziritaxestat in rat plasma after intravenous and oral administration. Pharmacokinetic results demonstrated that ziritaxestat displayed a short half-life (~3 h) and low bioavailability (20.52%).     

Capillary electrophoresis and ultra-high-performance liquid chromatography methods in clinical monitoring of creatinine in human urine: A comparative study

Creatinine is an important diagnostic marker and is also used as a standardization tool for the quantitative evaluation of exogenous/endogenous substances in urine. This study aimed at evaluating and comparing three analytical approaches, based on hyphenations of different separation [two-dimensional capillary isotachophoresis (CITP–CITP), capillary zone electrophoresis (CZE), ultra-high-performance liquid chromatography (UHPLC)] and detection [conductivity (CD), ultraviolet (UV), tandem mass spectrometry (MS/MS)] techniques, for their ability to provide reliable clinical data along with their suitability for the routine clinical use (cost, simplicity, sample throughput). The developed UHPLC–MS/MS, CITP–CITP–CD, and CZE–UV methods were characterized by favorable performance parameters, such as linearity (r ˃ 0.99), precision (relative standard deviation, 0.22–2.97% for the creatinine position in analytical profiles), and recovery (87.1–115.1%). Clinical data, obtained from the analysis of 24 human urine samples by a reference enzymatic method, were comparable with those obtained by the tested methods (Passing–Bablok regression and Bland–Altman analysis), approving their usefulness for the routine clinical use. In this context, the UHPLC–MS/MS method provides benefits of enhanced orthogonality/accuracy and high sample throughput (threefold shorter total analysis times than the CE methods), whereas advantages of the CE methods for routine labs are simplicity and low cost of both the instrumentation and measurements.     

Accurate,sensitive determination of omega-6 and omega-3 polyunsaturated fatty acids in human plasma,urine samples

Quantitative determination of omega-6 and omega-3 polyunsaturated fatty acids in human plasma and urine with high accuracy and precision provides significant information to monitor the underlying etiology of several diseases. In this regard, liquid chromatography-mass spectrometry is a good choice owing to its great selectivity and sensitivity. Additionally, the hybrid quadrupole–time of flight–mass spectrometer systems provides easy identification of target compounds with superior mass measurements. In this study, an analytical method has been developed for simple, accurate and simultaneous determination of linoleic acid, arachidonic acid, docosahexaenoic acid and eicosapentaenoic acid in a short chromatographic analysis period. The developed method is suitable for the quantitative detection of these four compounds with detection limits ranging between 1.1–3.0 ng ml⁻¹ and its applicability was assessed in human urine and plasma samples. As a result, acceptable accuracy (between 83 and 111%) and good precision (<6%) were obtained for target compounds using matrix matching calibration strategy.